Arcam DV78 Spécifications télécharger pdf (Page 21)

100

DV78

English

DV78

Problems with audio output

Problem Possible cause Solution

No sound! Incorrect input selected on audio

device (decoder, receiver, amplifier,

etc.)

Select the appropriate input on the audio device (consult that product’s

handbook)

Bad audio connection (analogue or

digital) from DV78 to audio device

Check connections at both ends and, if necessary, try an alternative cable

No sound from the centre/rear

speakers

A two-channel source, such as a CD, is

being played

There is no fault

The ‘Audio’ is set incorrectly in the

‘Setup’ menu

Enter the ‘Setup’ menu and change the ‘Audio’ setting to ‘Bitstream/2ch.’

(see page 9)

Bad connection between the DV78 and

the amplifier/receiver or the amplifier/

receiver and the speakers

Check connections at both end and, if necessary, try alternative cables

Problems with disc playability

Problem Possible cause Solution

Player loads disc but does not play,

or play-back halts unexpectedly

(perhaps with the message ‘Invalid

Region’ being displayed)

Not all discs play automatically when

loaded

Press PLAY

There is a fault in the manufacturing of

the disc

Some discs are manufactured incorrectly, and are known to cause problems

on ARCAM (and other) DVD players. Naturally, we aim to support all discs; from

time-to-time we issue software upgrades for the player that fixes new problems

of which we are aware. Please contact ARCAM customer support for further

details.

The disc is from the wrong region DVD discs are designed to be played only in the region that they are sold in

(for example, discs from the USA are ‘Region 1’ and discs from Europe are

‘Region 2’). Your player is factory-configured to play discs from the region it is

to be sold in, and may not play discs from other regions.

Disc does not play and ‘Bad Disc’ is

displayed

The disc is damaged or dirty, or does

not contain any files that the DV78 can

handle

Remove disc from tray and check surfaces for damage or dirt. In the case of a

CD-ROM, check that the disc contains valid MP3/WMA or JPEG files.

Some MP3/WMA files cannot be

played

There are some restrictions on the

type of MP3/WMA files that the DV78

player can play

See page 18 of this Handbook

The player takes a long time to

identify a CD

Since this is a DVD player (primarily), it checks for discs in the following order: DVDs, SVCDs, VCDs, CDs. Therefore it

takes longer to identify a CD than any other disc type.

The front-panel display is not

illuminated

The front-panel display has been

switched off

The front panel supports three different levels of illumination. Press the ‘DISP’

button on the remote control to select your preferred level

Before contacting customer services

If any problem persists or cannot be cured using the advice

given, either contact your Arcam dealer or Arcam customer

support.

Before contacting Arcam customer services with a question

however, it is useful to have various version and region

numbers available. This information is displayed in the top left

corner of the screen when the player is rst switched on (or

brought out of standby).

This information is shown for approximately two seconds, and

has the following format:

software version/ drive version/ Arcam region/ DVD region

Downloaded From Disc-Player.com Arcam Manuals

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Arcam DV78 Spécifications Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Arcam DV78