Arcam DV135 Instructions d'exploitation Page 13
- Page / 92
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
English
DV135
E-13
HDMI colour space
This setting controls the type of video (the colour space) given out over the HDMI connection.
Auto The colour space will be set appropriately for the connected display.
This is the recommended setting if you are connecting the DV135 to an
HDMI- or DVI-compliant device.
RGB The HDMI connection carries RGB video with standard video levels.
RGB (PC) The HDMI connection carries RGB video suitable for use with a computer monitor.
YUV The HDMI connection carries Y, Pb, Pr (YUV) component video.
This setting can be changed only if ‘Main video output’ is set to ‘HDMI’. This setting has no effect on the
analogue video outputs.
Analogue resolution
Allows selection of interlaced or de-interlaced (progressive scan) output from the component
video connection.
SD-interlaced The video output will always be interlaced (standard denition video). Use this
setting if your display device does not support progressive scan.
SD
Progressive
The component- and HDMI-video outputs will put progressive scan video out for
both PAL and NTSC discs. Use this setting only if your display device supports
progressive scan in both PAL and NTSC formats.
This setting can be changed only if ‘Main video output’ is set to ‘Analogue’.
Note that the video on the component video connections always matches that on the HDMI link,
so changing this value when in ‘Analogue’ mode will change the HDMI output too.
The S-video output will be muted when progressive scan is active.
Analogue NTSC black (Pedestal)
This setting controls the ‘pedestal’ signal or black level when the NTSC video standard is used.
0 IRE This removes the pedestal from NTSC video. This setting should be used in Japan,
and also if you are using RGB video, whatever the country.
7.5 IRE This is the standard pedestal level that should be used in all countries that use
NTSC video, with the exception of Japan.
This setting can be changed, but it only has an effect with NTSC output standards.
Cadence over-ride
This setting is used to correct motion artefacts with poorly mastered DVDs. For instance a lm image
shot at 24 frames per second may be tagged (incorrectly) with a video frame rate of 30.
Only over-ride the default setting if artefacts are present on the picture and return DV135 to the Auto
(Default) setting to view the next DVD. Cadence over-ride also returns to ‘Auto’ after powering off.
Auto (Default) Use cadence setting tag on the DVD
Film Force cadence to lm rate
Video Force cadence to video rate
Not all displays support
progressive scan. If you
enable progressive scan
accidentally and your
display does not support
it, you may be unable
to view the picture from
the DVD player, including
the on-screen display
required to change the
video settings back.
If this happens, use a
composite or SCART video
connection (which always
carry interlaced video)
between the DV135 and
your display device in
order to be able to see
the set-up menu and
correct the mistake.
- Arcam DV135 DVD player 1
- Safety guidelines 2
- Contents 3
- Making audio connections 5
- Connecting to a power supply 6
- Basic use of your DVD player 7
- CR-515 remote control 8
- Advanced controls (CR-515) 9
- Conguring your DVD player 10
- Operational set-up 11
- Video set-up 12
- HDMI colour space 13
- Analogue resolution 13
- Cadence over-ride 13
- Audio set-up 14
- Completing the set-up 15
- Jumping to a particular point 16
- Special playback modes 16
- Disc navigator screen 17
- The HDMI interface 18
- Remote-control codes 19
- Technical specications 20
- Picture disc compatibility 21
- Guarantee 22
- Lecteur de DVD Arcam 23
- Consignes de sécurité 24
- Table des matières 25
- Installation 26
- Connexions audio 27
- Cordon secteur 28
- Branchement 28
- 29
- 29
- Commandes avancées (CR-515) 31
- Introduction 32
- Afchage d’une image 32
- Français 35
- Type de signal HDMI 35
- Résolution analogique 35
- Noir NTSC analogique 35
- Réglage audio (menu Audio) 36
- Finalisation du réglage 37
- Fonctions DVD et VCD avancées 38
- Écran de navigation du CD 39
- Interface HDMI 40
- Codes de télécommande 41
- Caractéristiques techniques 42
- Garantie 44
- DVD-Spieler Arcam DV135 45
- Sicherheitsrichtlinien 46
- SCART-Ausgang 49
- Die Fernbedienung 50
- Anschließen an das Stromnetz 50
- Die Fernbedienung CR-515 52
- Kongurieren des DVD-Spielers 54
- Video-Hauptausgang 56
- Anzeigestandard 56
- Anzeigeformat 56
- HDMI-Auösung 56
- HDMI-Farbraum 57
- Auösung analog 57
- NTSC-Schwarz analog 57
- Digitale Audioausgabe 58
- DVD Sample Rate 58
- VCD-Modus 58
- SETUP drücken 59
- Wiedergabemodi 60
- CD Navigationsbildschirm 61
- Die HDMI-Schnittstelle 62
- Codes für die Fernbedienung 63
- Technische Daten 64
- Arcam DV135 DVD-speler 67
- Veiligheidsrichtlijnen 68
- Inhoudsopgave 69
- Installatie 70
- Audioverbindingen maken 71
- Aansluiting op een lichtnet 72
- Bediening van uw DVD-speler 73
- Nederlands 75
- Uw DVD-speler congureren 76
- Werkingsinstellingen 77
- Video instellen 78
- HDMI-kleurruimte 79
- Analoge resolutie 79
- Analoog NTSC-zwart 79
- Geluid instellen 80
- De set-up voltooien 81
- Naar een speciek punt gaan 82
- Speciale afspeelmodi 82
- De HDMI-interface 84
- Codes van afstandsbediening 85
- Technische specicaties 86
- SH180Issue 1 92
Produits connexes et manuels pour Lecteurs de DVD Arcam DV135
Lecteurs de DVD Arcam DV78 Spécifications
(100 pages)
(100 pages)
Lecteurs de DVD Arcam DV27 Spécifications
(21 pages)
(21 pages)
Lecteurs de DVD Arcam DV78 Spécifications
(24 pages)
(24 pages)
Lecteurs de DVD Arcam DV27A Spécifications
(23 pages)
(23 pages)
(28 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.249 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels