Arcam A19 Instructions d'exploitation Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 86
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
E-12
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 50W
Single channel, 4Ω, at 1kHz 90W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 100pF
Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB
Signal/noise ratio (Awtd) 50W, ref. 5mV input 80dB
Overload margin, 50mV at 1kHz 20dB
Line and AV inputs:
Nominal sensitivity 1V
Input impedance 10kΩ
Maximum input 4.6Vrms
Frequency response 20Hz—20kHz ± 0.2dB
Signal/noise ratio (Awtd) 50W, ref. 1V input 105dB
Preamplier output
Nominal output level 630mV
Output impedance 230Ω
Headphone output
Maximum output level into 600Ω 4V
Output impedance
Load range 16Ω—2kΩ
Accessory power output
Using accessory power cable supplied, provides two
2.1mm DC connectors
6V, 1A
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 350W
Dimensions W x D x H (including feet) 432 x 275 x 85mm
Weight (net) 8.5kg
Weight (packed) 10.2kg
Supplied accessories Mains lead
CR108 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE: All specication values are typical unless otherwise stated.
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 85 86

Commentaires sur ces manuels

Pas de commentaire